CONTACT ANGLE
CONTACT ANGLE GONIOMETER AND TENSIOMETER PRODUCTS
CONTACT ANGLE
RAMÉ-HART PRECISION CONTACT ANGLE GONIOMETERS AND TENSIOMETERS ARE BACKED BY NEARLY 50 YEARS OF EXPERIENCE AND REPUTATION. RAMÉ-HART WAS THE FIRST COMANY IN THE WORLD TO MANUFACTURE A CONTACT ANGLE GONIOMETER BASED ON THE NRL DESIGN OF DR. WILLIAM ZISMAN. TODAY NEARLY FIVE OF DECADES OF EXPERIENCE ARE BUNDLED IN EACH CONTACT ANGLE GONIOMETER AND TENSIOMETER. RAMÉ-HART ONLY MAKES SURFACE SCIENCE TOOLS FOR MEASURING CONTACT ANGLE AND SURFACE TENSION. THAT IS OUR SOLE FOCUS. OUR MACHINISTS AND INSTRUMENT TECHNICIANS HAND BUILD AND ASSEMBLE EACH UNIT TO RIGID SPECIFICATIONS. NO GONIOMETER SYSTEM WILL SHIP FROM OUR FACILITY UNTIL IT HAS BEEN THOROUGHLY TESTED AND CALIBRATED AND EVERY COMPONENT IS IN PROPER WORKING ORDER. RAMÉ-HART IS THE WORLD-WIDE LEADER IN SURFACE SCIENCE INSTRUMENTS AND CONTACT ANGLE GONIOMETERS.
PLEASE REFER TO THE MATRIX BELOW TO BETTER UNDERSTAND THE DIFFERENCES BETWEEN THE VARIOUS GONIOMETER AND GONIOMETER / TENSIOMETER (G/T) PRODUCTS.
PLEASE REFER TO THE MATRIX BELOW TO BETTER UNDERSTAND THE DIFFERENCES BETWEEN THE VARIOUS GONIOMETER AND GONIOMETER / TENSIOMETER (G/T) PRODUCTS.
| Measures Contact Angle | / | / | / | / | / | / | / | / |
|---|---|---|---|---|---|---|---|---|
| Measures Surface Energy (using suite of six SE tools) | Ϯ | / | / | / | / | / | / | / |
| Measures Surface Tension and Interfacial Tension | Ϯ | Ϯ | / | / | / | Ϯ | / | / |
| Includes High Speed Digital CCD Camera, Series F2 or F4 | F2 | F4 | F4 | F4 | F4 | F4 | F4 | F4 |
| Goniometer or Goniometer / Tensiometer | G | G | G/T | G/T | G/T | G | G/T | G/T |
| Edition of DROPimage: CA, STD (Standard) or ADV (Advanced) | CA | STD | ADV | ADV | ADV | STD | ADV | ADV |
| System includes PC & LCD | / | / | / | / | / | / | / | / |
| Supports 210fps G1 Series High Speed Upgrade Kit (p/n G1-KIT) | / | / | / | / | / | |||
| Supports 120fps F3 Series High Speed Upgrade Kit (p/n F3-KIT) | / | / | / | / | / | |||
| 16" or 21" Optical Bench | 16" | 16" | 16" | 16" | 16" | 21" | 21" | 21" |
| Supports Manual Tilting Base | / | / | / | / | / | / | / | / |
| Measures Contact Angle | / | / | / | / | / | / | / | / |
| Supports Automated Tilting Base | Ϯ | / | / | Std | / | Std | ||
| Standard Precision 3-Axis Locking Leveling Leveling Stage | / | / | / | / | / | |||
| Advanced Precision Graduated Heavy Duty 3-Axis Stage with fine and course vertical adjustment and Leveling | / | / | / | |||||
| Includes Manual Microsyringe Dispensing | / | / | / | / | / | / | / | / |
| Supports optional Automated Dispensing System | Ϯ | / | / | / | / | / | / | / |
| Supports optional Oscillator | Ϯ | / | / | / | Ϯ | / | / | |
| Supports Environmental Fixture | / | / | / | / | / | / | / | / |
| Supports Environmental Chamber | / | / | / | |||||
| Supports Advanced Chamber | / | / | ||||||
| Supports all modular accessories | / | / | ||||||
| Maximum Wafer Support (diameter) | 4" | 4" | 4" | 4" | 4" | 12"♦ | 12" | 12" |
| Supports Vacuum Chuck 6" or 8" | / | / | / | |||||
| Includes 1-year Parts and Labor Warranty and Priority Software Support | / | / | / | / | / | / | / | / |
| Halogen Fiber Optic (HFO) or LED Backlighting | LED | HFO | HFO | HFO | HFO | HFO | HFO | HFO |
| Available in 115V and 230V | / | / | / | / | / | / | / | / |
Ϯ – requires software upgrade♦ – Model 400 includes an 8″ Wafer Support but supports up to 12″.
Note that all current goniometer models ship with a microsyringe fixture (p/n 100-10) and microsyringe assembly (p/n 100-10-20) for manual dispensing. A wide variety of needles are available. See our chart here: download_loginlab_equipmentcontact_angleneedles.pdf. The optional software-driven Automated Dispensing System is supported on Models 200 and up.
In surface science, an instrument called a contact angle goniometer is used to measure static contact angle, advancing and receding contact angle, and in some cases, surface energy. The root goni refers to “angle” while meter refers to measuring device. Thus a goniometer is a measuring device for angles. While the term has been used to describe a tool used by physical therapists and also for measuring other types of angles, the traditional and more prominent use of the word “goniometer” has been to describe a contact angle meter.
A goniometer / tensiometer is an instrument that can measure both contact angle as well as surface tension and interfacial tension. Models 250, 260, 500, and 590 are all goniometer / tensiometer instruments. All (5) of these models ship with DROPimage Advanced software. This powerful program calculates surface and interfacial tension using a standard PC. The method used is based on the Young-Laplace equation and the program has been designed to handle pendant, inverted pendant, sessile, and captive bubble drops. DROPimage Advanced is methods-based allowing full control over every aspect of the experiment allowing for sophisticated dynamic and time-dependant studies. Results include surface tension, interfacial tension, contact angle, surface energies of solids, drop dimensions, volume and surface area, as well as surface dilatational elasticity and viscosity. Full control over the Automated Dispensing System and the Automated Tilting Base accessories is integrated into the software allowing them to be controlled via discrete controls or via a methods-based experiment. The Automated Dispensing System and the Automated Tilting Base are included with Model 290 and 590 but are sold separately with all other models including Model 250, 260 and 500. DROPimage Advanced has all of the surface energy tools included with DROPimage Standard.
In surface science, an instrument called a contact angle goniometer is used to measure static contact angle, advancing and receding contact angle, and in some cases, surface energy. The root goni refers to “angle” while meter refers to measuring device. Thus a goniometer is a measuring device for angles. While the term has been used to describe a tool used by physical therapists and also for measuring other types of angles, the traditional and more prominent use of the word “goniometer” has been to describe a contact angle meter.
A goniometer / tensiometer is an instrument that can measure both contact angle as well as surface tension and interfacial tension. Models 250, 260, 500, and 590 are all goniometer / tensiometer instruments. All (5) of these models ship with DROPimage Advanced software. This powerful program calculates surface and interfacial tension using a standard PC. The method used is based on the Young-Laplace equation and the program has been designed to handle pendant, inverted pendant, sessile, and captive bubble drops. DROPimage Advanced is methods-based allowing full control over every aspect of the experiment allowing for sophisticated dynamic and time-dependant studies. Results include surface tension, interfacial tension, contact angle, surface energies of solids, drop dimensions, volume and surface area, as well as surface dilatational elasticity and viscosity. Full control over the Automated Dispensing System and the Automated Tilting Base accessories is integrated into the software allowing them to be controlled via discrete controls or via a methods-based experiment. The Automated Dispensing System and the Automated Tilting Base are included with Model 290 and 590 but are sold separately with all other models including Model 250, 260 and 500. DROPimage Advanced has all of the surface energy tools included with DROPimage Standard.
DROPimage Software
The ramé-hart DROPimage series software was written and developed by Dr. Finn Knut Hansen, a Scientist and Professor of Chemistry at the University of Oslo, and is available exclusively from ramé-hart instrument co. Our lineup currently includes three editions as detailed below.
| Included with Model 190 | / | ||
|---|---|---|---|
| Included with Models 200, 300, and 400 | / | ||
| Included with Models 250, 290, 500, and 590 | / | ||
| Supports F Series Cameras | / | / | / |
| Supports High-Speed G Series Cameras | / | ||
| Version available with support for legacy analog camera and frame grabber | / | / | |
| Includes Calibration Command | / | / | / |
| Automatically measures left and right contact angle and drop dimensions (height and width) | / | / | / |
| Images can be saved and opened | / | / | / |
| Results can be saved to a (text) log file | / | / | / |
| Includes suite of (7) surface energy tools | / | / | |
| Supports Automated Dispensing System (100-22) | / | / | |
| Profile data can be saved and opened | / | / | |
| Includes Phase Editor for adding and modifying liquids and solids | / | / | |
| Measures surface tension and interfacial tension | / | ||
| Methods-based Experiment Wizard and design tool including Method Editor, Parameter Editor, Time File Editor, Event File Editor, Phase Editor, and Session Control | / | ||
| Supports optional Automated Tilting Base (100-25-A) | / | ||
| Supports optional Oscillator (100-28) for measuring surface dilatational elasticity and viscosity | / | ||
| Supports Relaxation Experiments | / | ||
| Includes an Advanced Reporting Tool | / | ||
| Upgradeable to DROPimage Standard | / | / | n/a |
| Upgradeable to DROPimage Advanced | / | n/a | n/a |
Ϯ – requires software upgrade♦ – Model 400 includes an 8″ Wafer Support but supports up to 12″.
Note that all current goniometer models ship with a microsyringe fixture (p/n 100-10) and microsyringe assembly (p/n 100-10-20) for manual dispensing. A wide variety of needles are available. See our chart here: download_loginlab_equipmentcontact_angleneedles.pdf. The optional software-driven Automated Dispensing System is supported on Models 200 and up.
In surface science, an instrument called a contact angle goniometer is used to measure static contact angle, advancing and receding contact angle, and in some cases, surface energy. The root goni refers to “angle” while meter refers to measuring device. Thus a goniometer is a measuring device for angles. While the term has been used to describe a tool used by physical therapists and also for measuring other types of angles, the traditional and more prominent use of the word “goniometer” has been to describe a contact angle meter.
A goniometer / tensiometer is an instrument that can measure both contact angle as well as surface tension and interfacial tension. Models 250, 260, 500, and 590 are all goniometer / tensiometer instruments. All (5) of these models ship with DROPimage Advanced software. This powerful program calculates surface and interfacial tension using a standard PC. The method used is based on the Young-Laplace equation and the program has been designed to handle pendant, inverted pendant, sessile, and captive bubble drops. DROPimage Advanced is methods-based allowing full control over every aspect of the experiment allowing for sophisticated dynamic and time-dependant studies. Results include surface tension, interfacial tension, contact angle, surface energies of solids, drop dimensions, volume and surface area, as well as surface dilatational elasticity and viscosity. Full control over the Automated Dispensing System and the Automated Tilting Base accessories is integrated into the software allowing them to be controlled via discrete controls or via a methods-based experiment. The Automated Dispensing System and the Automated Tilting Base are included with Model 290 and 590 but are sold separately with all other models including Model 250, 260 and 500. DROPimage Advanced has all of the surface energy tools included with DROPimage Standard.
In surface science, an instrument called a contact angle goniometer is used to measure static contact angle, advancing and receding contact angle, and in some cases, surface energy. The root goni refers to “angle” while meter refers to measuring device. Thus a goniometer is a measuring device for angles. While the term has been used to describe a tool used by physical therapists and also for measuring other types of angles, the traditional and more prominent use of the word “goniometer” has been to describe a contact angle meter.
A goniometer / tensiometer is an instrument that can measure both contact angle as well as surface tension and interfacial tension. Models 250, 260, 500, and 590 are all goniometer / tensiometer instruments. All (5) of these models ship with DROPimage Advanced software. This powerful program calculates surface and interfacial tension using a standard PC. The method used is based on the Young-Laplace equation and the program has been designed to handle pendant, inverted pendant, sessile, and captive bubble drops. DROPimage Advanced is methods-based allowing full control over every aspect of the experiment allowing for sophisticated dynamic and time-dependant studies. Results include surface tension, interfacial tension, contact angle, surface energies of solids, drop dimensions, volume and surface area, as well as surface dilatational elasticity and viscosity. Full control over the Automated Dispensing System and the Automated Tilting Base accessories is integrated into the software allowing them to be controlled via discrete controls or via a methods-based experiment. The Automated Dispensing System and the Automated Tilting Base are included with Model 290 and 590 but are sold separately with all other models including Model 250, 260 and 500. DROPimage Advanced has all of the surface energy tools included with DROPimage Standard.
