Fume Hood

Small Hood 

Ductless -Thai

Ductless -USA 


Arm Hood

Glove Box





Lab Furniture      Ductless Fume Hood   

  • Ductless Fume Hoods
  • Aura Ductless Fume Hoods
  • Balance Enclosure / Fume Hood
  • Economy Workstation
  • Ductless Fume Extractor
  • Downflow Workstation
  • Class 100 Laminar Airflow with Timed UV Decontamination
  • Circulation-free Enclosure for PCR Applications
  • Smooth and Precise Horizontal Laminar Flow Air
  • Filters
  • Accessories

Ductless Fume Hoods

Ductless fume hoods are self-contained carbon and/or HEPA filtered enclosures that remove hazardous fumes, vapors and particles from virtually any laboratory application. A Mystaire Misonix ductless fume hood is an ideal solution for a wide variety of applications. Simply place a unit on an existing countertop or cart and immediately improve the air quality within your laboratory.

The Ductless Advantage

  • No installation cost
  • Portable
  • Energy efficient
  • ASHRAE 110-1995 Certified
  • UL Listed
  • Meets applicable OSHA and ANZI Standards

Unlike traditional fume hoods there are no installation costs or ductwork necessary. Set up is simple and can be done in minutes. Rolling carts are available so the unit can be moved throughout the lab. Operational costs are lowered because expensive heat and air conditioning is re-circulated instead of being exhausted out of the building.

How it works

Air is drawn into the opening at the front of the fume hood. Any fumes or particles within the hood are filtered. After the contaminants are filtered, clean air is returned to the room.

Each unit requires a pre-filter, main filter and safety filter. The safety filter is located on top of the unit, above the fan. Generally the main and safety filter are the same filter type but for specific applications a combination of filter types may be required. Mystaire Misonix units meet all relevant regulatory standards.

Aura Filter Monitoring System

Airflow and Filter Monitoring System

  • Automatic fan adjustment to maintain proper airflow velocity
  • Vapor sensor to detect chemical breakthrough of the filter
  • Bar graph displaying filter saturation level
  • Internal timer tracking filter usage
  • Display of the type of filter in use

Choice of Filters

One filter cannot protect you from every type of fume, vapor, odor and particle. To ensure safety, we offer a free service to evaluate your particular application. Please contact us for a free evaluation.

Aura Filter Replacement
Part # AU-30
Dimensions: 30"W x 28"D x 50"H
Part # AU-42
Dimensions: 42"W x 28"D x 50"H
Part # AU-54
Dimensions: 54"W x 28"D x 50"H
Filters are sold separately.
All units available 110/220V.


Aura Ductless Hoods

Aura models are the most well constructed and durable ductless hoods on the market today. The base section is made from high grade aluminum with an acrylic sash and side panels. The head section (fan, filter and microprocessor control housing) is encased in a sturdy aluminum frame with a powder coated finish. These materials were chosen for both strength and stability. Mystaire Misonix units are made in the USA and built to last.

The units are available in three sizes and feature Mystaire Misonix Advance Filter Monitoring System which includes:

  • Digital display of airflow velocity
  • Audible and visual alarms for low airflow and hydrocarbon breakthrough
  • Filter saturation alarms, display of filter type, and safety filter to prevent chemical breakthrough even after main filters are completely saturated
  • Sensor that adjusts blower speed to maintain air velocity
  • Time tracking of filter use
  • ASHRAE 110-1995 Certified
  • UL Listed
  • Meets applicable OSHA and ANZI Standards

All units consist of powder coated aluminum head and base section with fluorescent lighting, chemically resistant acrylic panels, removable fiberglass spill tray and an electrostatically charged pre-filter.

"L" models are available for customers who do not require the added features of the Advanced Filter Monitoring System. The "L" model features visual alarms to notify users of low airflow conditions. Each unit is equipped with a test port for manual filter saturation testing. Gas detection tubes and pumps are available from several laboratory safety distributors.


Balance Enclosure / Fume Hood

The new Ductless Workstation is a horizontal flow hood that is highly effective at containing fumes, vapors and powders. The front sash opening is 10" high offering an extremely comfortable working area while maintaining a high degree of operator protection. The hinged sash can be opened to a full working area of 36" wide by 16" high and still offer a high degree of protection.

Internal fans draw a constant flow of air into the system. The combination of filters contains powders and fumes before returning clean, filtered air to the lab. The top, sides and front of the unit are made of clear acrylic allowing natural light inside the hood. The open design eliminates the claustrophobic feeling created by many standard fume hoods. The workstation’s is made from steel for strength and durability.

At Mystaire Misonix, we've built our excellent reputation by offering high quality and reliable equipment. Please call to see how we can help improve your laboratory.

FE-36 Balance Enclosure

The Ductless Advantage:

  • Compact design
  • Energy efficient
  • No installation cost


  • 100 fpm face velocity
  • Low airflow alarm
  • Clear top, front and side panels
  • Spill tray (removable)
  • Sparkless internal blowers
  • Steel construction
  • Electrostatic particle filter
  • Carbon or HEPA filter


Economy Workstation

Economy Workstation

The FE-2620 is a compact, economical alternative for capturing fumes and particulate matter. This light-weight model is constructed from durable epoxy-coated metal, just like our larger models. The base section is a one-piece acrylic frame with a hinged sash for easy access to the interior of the hood. The head and base can be easily separated if you need to move the unit or wish to store it when not in use.


  • Balance Enclosure
  • Slide Staining and Coverslipping
  • Drug and Chemical Analysis
  • Pipetting

A special feature of this unit is the adjustable air speed control. Air velocity can be adjusted from 0-120 fpm. This is especially useful for powder weighing when the hood is used as a balance enclosure. A variety of fi lter options are available for chemical or particle containment. Options include fl uorescent lighting and a spill tray


Ductless Fume Extractor

Fume Extractor model FE-1200 Single

The FE-1200 is an inexpensive, mobile device that offers the user the ability to position the vacuum hose in virtually any location. Popular uses include capturing fumes from soldering, ballistics testing and graphic arts projects. A variety of filter options are available to capture fumes or particles.


  • Soldering
  • Ballistics
  • Histology
  • Art conservation

Downflow Workstation

Downflow Workstation

Fumes and particles are drawn downward through the work surface and away from your breathing zone. The unit's open design allows for close inspection of samples while still offering a high level of protection. Applications including powders or chemicals with high molecular weights are ideal due to the downward airflow pattern.


  • Histology
  • Microscopy
  • Solvent Bonding
  • Fingerprinting with powders

The base section is removable for easy cleaning which is especially useful when working with powders. Additional features include stainless steel base construction and internal fluorescent lighting.


Class 100 Laminar Airflow with Timed UV Decontamination

Mystaire Misonix PCR Prep Stations are compact laminar flow enclosures that reduce the risk of sample contamination while performing polymerase chain reaction experiments.

Airborne contaminants are prevented from entering into the work zone through constant positive pressure HEPA filtered air. Each PCR Prep Station is equipped with a built-in 254 nanometer shortwave lamp to effectively decontaminate the work area between amplifications. Safety interlocks are included on all PCR Prep Stations to prevent operator exposure to potentially harmful UV radiation.

PCR Prep Stations are bench-top personal clean zones allowing the operator to amplify RNA and DNA while minimizing the potential for background from airborne contaminants.

MY-PCR Prep Station

MY-PCR Features

  • Class 100 vertical laminar flow air
  • 15-Minute UV light timer
  • Clear, polycarbonate construction with chemically impervious polypropylene work surface
  • Available in 24″ and 32″ widths with nominal depth of 24″
  • Shelf stand with built-in four position pipette holder
  • Optional electrical cord access port 110V or 220V AC

FE-PCR Prep StationFE-PCR Features

  • Class 100 vertical laminar flow air
  • 0- to 60-Minute UV light timer
  • Epoxy-coated construction with stainless steel work surface
  • Available in 24″ width with nominal depth of 24″ 110V or 220V AC
Air Flow Diagram

Circulation-free Enclosure for PCR Applications

CleanPrep™ Dead Air BoxMystaire® Misonix® CleanPrep™ Dead Air Boxes are circulation-free enclosures that establish an ideal work area to protect against contamination in sensitive PCR amplification reactions. CleanPrep™ Dead Air Boxes are constructed from thermally-fused polypropylene that offers exceptional chemical resistance, does not adsorb moisture and can be easily cleaned and decontaminated between amplifications using a variety of disinfectant solutions.

Access into the CleanPrep™ Dead Air Box is gained through a folding vertical polycarbonate sash. The sash is designed with an overlap to eliminate potentially harmful UV rays from escaping the enclosure.

As an added safety feature, the lower portion of the sash is fitted with a position switch that controls the UV light and its ability to be turned on and off.

When the polycarbonate sash is in the vertical position the UV light is disabled allowing the fluorescent light to be illuminated. Workspace illumination is important during amplifications and each CleanPrep™ enclosure is fitted with a high-intensity fluorescent lamp to effectively illuminate the work area.


CleanPrep™ Features

  • Seamless polypropylene design for easy decontamination between amplifications
  • Clear polycarbonate access with overlap and safety position switch
  • UV shelf with integrated pipette holder- accommodates four pipettors
  • High intensity fluorescent lamps and shortwave UV light
  • Available in 24, 36 and 48 inch widths with nominal 24 inch depth.
MY-DB24 24” Wide CleanPrep™ Workstation with Timed UV Light
MY-DB36 36” Wide CleanPrep™ Workstation with Timed UV Light

MY-DB48 48” Wide CleanPrep™ Workstation with Timed UV Light

Smooth and Precise Horizontal Laminar Flow Air

Horizontal Laminar Flow BenchesThe Mystaire® Misonix® Horizontal Laminar Flow Clean Bench is specially designed to provide a Class 100/ISO 5 particle-free clean-air environment needed for laboratory testing, manufacturing, inspection, or pharmaceutical procedures. Precise horizontal laminar airfllow is obtained through a high-quality HEPA filter installed in the rear baffle of the cabinet. Air is forced through the HEPA filter and then enters the chamber through a diffuser that distributes clean Class 100/ISO 5 particle-free clean-air over the entire work surface.

The work surface on each Mystaire® Misonix® horizontal laminar flow clean bench is constructed from stainless steel for easy cleaning and decontamination. The solid, stainless-steel work surface combined with the ultra-smooth horizontal laminar air flow creates an ideal environment when handling critical component inspections, assembly of optical components or working with pharmaceutical ingredients.


Horizontal Laminar Flow Bench Features

  • Microprocessor controller
  • Fluorescent Light
  • Mobile cart with locking casters
MY-HLF4 42” Wide Horizontal Laminar Flow Clean Bench
MY-HLF6 56” Wide Horizontal Laminar Flow Clean Bench



Mystaire Misonix offers several types of filters to meet your application. Carbon and HEPA filters can be used in combination to capture both fumes and particulates for a variety of uses such as in a cleanroom.

Filters for Ductless Fume Hoods

Carbon Filter Options

  • Hydrocarbons
  • Acids
  • Formaldehydes
  • Sulfur
  • Ammonia
  • Cyanoacrylate
  • HEPA Filters


All units are shipped with an electrostatically charged pre-filter.

Frequently asked questions

My low airflow alarm is going off, what's wrong?
Most often it's simply a dirty pre-filter. Check your pre-filters every 3 months and keep a spare on hand.

How long do filters last?
Filter life depends on how often you use your ductless fume hood and the amount of chemicals evaporated.

How do I know if I'm using the correct filter?
Contact Mystaire Misonix product specialists to review your application. Mystaire Misonix in house chemical engineers will evaluate your application at no charge.

Replacement Filters

Mystaire Misonix is the only source for filters to be used in our Ductless Fume Hoods and all filters are manufactured in our Creedmoor, NC facility.

Please be aware that other manufacturers are attemping to sell replacement filters for use in our systems. Due to our proprietary filter chamber design, sealing method and carbon granual sizing, alternative filters cannot guaranteed your safety. In addition, using non-Mystaire Misonix filters will void your warranty. If you are solicited by someone offering Mystaire Misonix filter alternatives, please contact us so you have all the facts in order to make an informed decision.




Solucide® is an EPA registered hard surface cleaner, disinfectant, and deodorizer. Solucide® is a broad-spectrum disinfectant spray that is effective in the presence of organic soil. Solucide® contains no alcohol or glutaraldehyde and has a fresh lemon scent.

Effective in Killing:
  • Norovirus (Norwalk Virus)
  • Parvo Virus
  • Hepatitis A Virus
  • Hepatitis B Virus
  • Hepatitis C Virus
  • Fast TB kill
  • HIV
  • Virucidal
  • Fungicidal
  • Pseudomonacidal
  • Pandemic H1N1 Influenza A Virus
  • SARS associated Coronavirus
  • Clostridium difficile (vegetative form)
  • Bactericidal (MRSE, MRSA, VRE, VISA, Strep pyogenes)
MY-FDR76 16 oz. pump spray bottle, 12 bottles per case


SecureDry™ Optional UV Light Sterilization Kit

SecureDry™ Optional UV Light Sterilization Kit

As a secondary disinfection method to Solucide®, SecureDry™ evidence drying cabinets can be fitted with a timer-activated short wave ultraviolet light sterilization kit. This sterilization method is effective in denaturing potentially live cells remaining in the chamber after use. The short wave UV light illuminates the interior of the chamber prior to placing the new evidence into SecureDry™, resulting in minimized cross contamination potential.

MY-FDR20 UV light sterilization kit for SecureDry™






For added mobility and flexibility Mystaire® Misonix® offers a complete line of companion carts and trolleys for the Aura® ductless fume hood and CA series bench top Cyanoacrylate fuming chambers. The carts and trolleys are epoxy coated steel with locking casters. They are designed specifically for the Mystaire® Misonix® line of products.

AU-250C 30" wide Cart/Trolley for AU-30 models, height 30"
AU-252C 30" wide Cart/Trolley for AU-30 models, height 35"
AU-550C 42" wide Cart/Trolley for AU-42 models, height 30"
AU-552C 42" wide Cart/Trolley for AU-42 models, height 35"
AU-750C 54" wide Cart/Trolley for AU-54 models, height 30"
AU-752C 54" wide Cart/Trolley for AU-54 models, height 35"
CA-6000C 37" wide Cart/Trolley for CA-3000 and CA-6000 models






short noteote




  Be a fan on facebook


National Direct Network Co., Ltd.
240 Soi Petchkasem 63/4 Petchkasem Road, Bangkae, Bangkae, Bangkok, Thailand 10160
Tel : 02 4444-655 Fax: 02 4444-650 email : sales@ndn.co.th