Lab equipment      Incubator Oven XB Model   

  • Universal Oven XB Model
  • XB032
  • XU058
  • XU112
  • XU225
  • Comparable Model
  • Application
  • Options
  • Accessories

Standard Oven DN Series

Incubators accurate and efficient, with natural and forced convection both!

Our incubators are designed to answer to all biological, medical, pharma- ceutical, hygiene industry laboratories for microbiological and most stan- dard incubation processes, quality controls, tempering, thermal storage...

 

All our XB microbiological incubators operate with the convection of your choice!

  • Incubators 2 in 1 ! Air convection and forced convection on the same incubator !
  • Temperature spatial variation with natural convection: < ±0,5°C at 37°C.
  • Temperature spatial variation with forced convection: < ±0,2°C at 37°C.
  • Temperature fluctuation: less than ±0,2°C.
  • The fan speed variator allows to switch the incubator from a natural convection to a forced convection.
  • Eight volumes : 24, 58, 112, 225, 343, 490, 686, 980 liters.

The C3000 Controller functions:

The PID digital controller FRANCE-ETUVES C3000 provides the following functions:
 
  • Pt100 Ω sensor in 3-wire-circuit.
  • Set and actual temperature display.
  • Delayed start: from 1mn to 99h59 mn.
  • Heating ramp: from 0,1 to 20°C/mn.
  • Heating timer: 0 to 99h59 mn.
  • Repeat loop.
  • Buzzer at the end of the cycle.
  • Overtemperature cut out.

 

A solid construction for lasting performance.

  • Eight sizes from 24 to 980 liters.
  • The inner casing is made of corrosion resistant stainless steel, bright polished.
  • The outer casing is made of sheet steel, finished in a tough stoved epoxy paint (white colour RAL9002).
  • No contact between inner and outer casing and an optimised insulation minimises heat dissipation and allow a best heating quality.
  • The walls and the door are insulated with glasswool, safe for users. The insulation is 50mm thick, ensuring efficient operation, low external temperatures and excellent thermal stability.


 


 

The temperature control is operated by our own C3000 Controller.

The regulation guarantees the highest possible temperature stability. The temperature time fluctuation is less than few tenths of degree. Temperature controller is microprocessor based, we design and program it specifically to meet your requirements. It provides a high accuracy and prevents the set temperature from being exceeded and it offers all functions that users need. Digital LEDs display set and actual temperatures as well as remaining process time.

An independant over-temperature thermostat (class 3.1 protection), with a visual and sound alarm, cut out with an adjustable upper limit, your products and the oven.


 

Through access vent, fresh air is supplied from the back of the oven.

A 30mm diameter exhaust vent is provided with an adjustable button to control the exhaust air flow from the front panel.

 

Equipment:

Shelves are wire-meshed. Multiple position shelving for convenient loading/unloading. Shelf supports are provided with anti-tilting feature. Additional shelves are available as accessories.

A 20mm diameter access port with silicone cork is fitted as standard in the left hand wall of the oven.

A wide range of factory-fitted options and accessories to meet your exact requirements.

 

XB032


XB032.
Non-contractual photography.
Model: XB032
Volume of the chamber: 32 liters
Performances:
Standard maximum temperature: 80°C
Temperature stability: < ± 0.2 °C
Dimensions:
Volume of the chamber: 32 liters
Internal dimensions (W x D x H): 300 x 270 x 400 mm
External dimensions (W x D x H): 405 x 490 x 634 mm
Stainless steel shelves:
Quantity of shelves: 2 provided / 6 maximum
Shelves dimensions: 270 x 240 mm
Max load on shelf / Total : 30/60 kg
Power supply & Various:
Voltage 50 Hz : 230V Mono
Standard heating Wattage 80°C: 220 Watts
Number of doors: 1
Fan air flow: 200 m3/hour
Weight : 30 kg.

 

XB058


XB058.
Non-contractual photography.
Model: XB058
Volume of the chamber: 58 liters
Performances:
Standard maximum temperature: 80°C
Homogeneity: < ± 1.2°C at 37°C
Temperature stability: < ± 0.2 °C
Dimensions:
Volume of the chamber: 58 liters
Internal dimensions (W x D x H): 400 x 360 x 400 mm
External dimensions (W x D x H): 505 x 582 x 634 mm
Stainless steel shelves:
Quantity of shelves: 2 provided / 2 maximum
Shelves dimensions: 370 x 330 mm
Max load on shelf / Total : 30/60 kg
Power supply & Various:
Voltage 50 Hz : 230V Mono
Standard heating Wattage 80°C: 240 Watts
Number of doors: 1
Fan air flow: 200 m3/hour
Weight : 47 kg.

 


 

XB112



Microbiological Incubator XB112
Non-contractual photography.
Model: XB112
Volume of the chamber: 112 liters
Performances:
Standard maximum temperature: 80°C
Homogeneity: < ± 1.2°C at 37°C
Temperature stability: < ± 0.2 °C
Dimensions:
Volume of the chamber: 112 liters
Internal dimensions (W x D x H): 500 x 450 x 500 mm
External dimensions (W x D x H): 605 x 671 x 734 mm
Stainless steel shelves:
Quantity of shelves: 2 provided / 8 maximum
Shelves dimensions: 470 x 420 mm
Max load on shelf / Total : 30/60 kg
Power supply & Various:
Voltage 50 Hz : 230V Mono
Standard heating Wattage 80°C: 300 Watts
Number of doors: 1
Fan air flow: 200 m3/hour
Weight : 54 kg

 

XB225


XB225.
Non-contractual photography.
Model: XB225
Volume of the chamber: 225 liters
Performances:
Standard maximum temperature: 80°C
Dimensions:
Volume of the chamber: 225 liters
Internal dimensions (W x D x H): 500 x 450 x 1000 mm
External dimensions (W x D x H): 605 x 671 x 1468 mm
Stainless steel shelves:
Quantity of shelves: 2 provided / 17 maximum
Shelves dimensions: 500 x 450 mm
Max load on shelf / Total : 30/120 kg
Power supply & Various:
Voltage 50 Hz : 230V Mono
Standard heating Wattage 80°C: 660 Watts
Number of doors: simple
Fan air flow: 400 m3/hour
Weight : 120 kg.

 

Comparable XB Model

XB Range: XB032 XB058 XB112 XB225
   
Performances:
Temperature range: Ambient temperature + 5°C to 80°C
Maximum temperature standard: 80°C
Temperature uniformity at 0°C: ± °C < 0.0 < 1.2 < 1.2 < 0.0
Temperature fluctuation:: ± °C < 0.2 < 0.2 < 0.2 < 0.0
Dimensions of the room:
Chamber volume: dm3 32 58 112 225
Width: mm 300 400 500 500
Depth: mm 270 360 450 450
Height: mm 400 400 500 1000
External dimensions:
Volume about: m3 0.13 0.19 0.3 0.6
Width: mm 405 505 605 605
Depth: mm 490 582 671 671
Height: mm 634 634 734 1468
Stainless steel shelves:
Supplied / Maximum:   2 / 6 2 / 2 2 / 8 2 / 17
Dimensions WxD: mm 270*240 370*330 470*420 500*450
Max weight shelf/Total: kg 30/60 30/60 30/60 30/120
Other informations:
Number of doors:   1 1 1 simple
Fan air flow: m3/h 200 200 200 400
Glasswindow WxH: (option) mm 200*200 200*200 180*350 350*350
Weight (empty): kg 30 47 54 120
Electrical supply:
Standard heating 80°C: Watts 220 240 300 660
Voltage: Volts 230V Mono 230V Mono 230V Mono 230V Mono
 

 

Applications

Our incubators are designed to answer to all biological, medical and pharmaceutical laboratories...
■Biological
■Microbiological
■Incubations Processes
■Medical
■Quality Control
■Tempering
■Thermal Storage

 

 

 

Use our incubators in all your applications:
 

 



 

 

 

 

Options

All options of XB range:

References Description
OP0010 Calibration certificate 1 point 1 temperature
FRANCE-ETUVES can control a temperature inside the oven thanks to a probe located in the middle of the oven.
 
OP0012 Calibration certificate 9 points 1 temperature
FRANCE-ETUVES can control a temperature inside the oven thanks to nine probes located in the oven.
 
OP0014 Work chamber lighting 40 W
A work chamber lighting allows you a better visibility of the whole contents of the oven and more comfort, in particular if the oven is installed in a dark room.
 
OP0041 Additional access port diameter 40 mm
A 40 mm hole is drilled in the middle of the left wall of the oven to introduce a probe.
 
OP0042 Additional access port diameter 60 mm
A 60 mm hole is drilled in the middle of the left wall of the oven to introduce a probe.
 
OP0048 Electrical plug inside the incubator

 
OP0049 Temperature profiler 4 programs 16 segments each

 
OP0051 Additional Pt100 probe with connector

 
OP0073

 
OP0097 Temperature paper recorder 1 Pt100 Probe XB & XBV
The temperature paper recorder enables to measure, with a probe, a temperature during a cycle and enables to record the temperature.
 
OP0107 Temperature paper recorder with 2 probes XB & XBV
The temperature paper recorder enables to measure, with to two probes, two different temperatures during a cycle and enables to record these temperatures.
 
OG9002 External casing made of stainless steel.
FRANCE-ETUVES can manufacture the outer case of the oven in stainless steel.
 
OG9003 Inner casing made of stainless steel 316L
FRANCE-ETUVES can manufacture the inner case of the oven in 316L stainless steel.
 
OG9004 Special color (indicate the RAL reference)
The ovens are covered with an epoxy painting of color gray light (RAL 7035). However, you can order a special color according to your requirements by indicating the RAL number.
 
OG9006 Door windows
A door window can be added to enable you to see and control the contents of the oven.
 
OG9008 Digital weekly program timer
 

 

   

 

Accessories

References Description
AC0011 Silicone cork diameter 40 mm
The silicone corks fill the passages bored in the walls of the oven for the passage of probes. When there are no probes, they prevent a loss of heat.
 
AC0012 Silicone cork diameter 60 mm
The silicone corks fill the passages bored in the walls of the oven for the passage of probes. When there are no probes, they prevent a loss of heat.
 
GA9001 Stainless steel wire-mesh shelf and 2 supports
The additional shelves are made in stainless steel of quality 304, they are electropolished for an irreproachable brilliant completion and easy to clean. They support a distributed load of 30kg and are provided with their 2 supports anti-swing which are fixed on the walls of the oven. 1 to 22 additional shelves can be ordered, depending on the model.
 
GA9002 Reinforced stainless steel wire-mesh shelf 60 kg and 2 supports
The additional shelves are made in stainless steel of quality 304, they are electropolished for an irreproachable brilliant completion and easy to clean. They support a distributed load of 60kg and are provided with their 2 supports anti-swing which are fixed on the walls of the oven. 1 to 22 additional shelves can be ordered, depending on the model.
 
GA9003 Stainless steel tray (20 mm depth)
The stacking kits are made in stainless steel of quality 304, they are electropolished for an irreproachable brilliant completion and easy to clean. Their depth of 20 mm enables to collect liquids or other substances likely to run during the process of drying, heating...
 
GA9004 Stacking kit
The stacking kit enables to stack two ovens for a saving in space in full safety.
 
GA9005 Sub-frame
The sub-frame enables to put the oven at height of work for a greater comfort and a better use of the oven in an ergonomic way.
 
GA9006 Sub-frame with casters
The sub-frame with casters enables to put the oven at height of work for a greater comfort and a better use of the oven in an ergonomic way.
 

 

   
 



 
 


 
 
short noteote

 

 

 

  Be a fan on facebook

 

National Direct Network Co., Ltd.
240 Soi Petchkasem 63/4 Petchkasem Road, Bangkae, Bangkae, Bangkok, Thailand 10160
Tel : 02 4444-655 Fax: 02 4444-650 email : sales@ndn.co.th