Lab Equipment     Syringe pump   

  • All Model
  • NE-300
  • NE-1000
  • NE-1010
  • Dual-NE-1000
  • NE-1002X
  • NE-4000
  • NE-4002X
  • NE-1600,NE-1800,NE-1200
  • Spec NE-1200,NE-1600,NE-800
  • NE-9000
  • Accessories
  • Catalog & Manual
New Era Syringe pump Model

 

Up to 12 channels in one pump - up to 100lbs of linear force per syringe - customizable out of box - infusion & withdrawal - OEM custom design services - fully programmable - multi-application dual pump system - continuous flow - nanolitre precision

 

Just Infusion Syringe Pump

 

 

 

 

Ne-300 “Just Infusion”™ Syringe Pump

 

  • · A basic single syringe pump for customers that just want infusion at an affordable price. 

  • · Does not withdraw, volume target, have computer interface or programmability

  • · Holds small or big syringes up to 60 mL

  • · Pumps continuously until you stop the pump

  • · Infusion rate can be changed while pumping

  • · Maximum pumping rate of 1500 mL/hr with a 60 mL syringe

  • · Precise reproducible flow rates

  • · Selectable infusion rates units: mL/hr, µL/hr, mL/min, µL/min

 

 

Dispensing Peristaltic Pump

Ne-9000 Programmable

Peristaltic Pump w/”Learn & Repeat”™Mode

  • Dispense and withdrawal pumping

  • · Built-in programmability. 

  • · Pump from a reservoir through replaceable continuous tubing.

  • · Pump never comes into contact with fluid.

  • · Continuous Pumping from 0.041 ml/min to 900 ml/min.

  • · Measured dispenses for production filling of bottles.

  • · "Learn and Repeat"™ for quick setup of production dispenses.

  • · Anti-Drip mode to stop oozing after dispenses

  • · Keypad, computer and foot switch interface.

  • · Calibration mode to improve accuracy

 

Full Featured Standalone Syringe Pumps

 

NE-1000 Single Syringe Pumps

 

 

 

 

NE-1000 Single Syringe Pump

 

NE-1010 High Pressure Syringe Pump

 

· Full-featured single syringe programmable pump. 

· Built-in easy to use programming features and an optional wide range of accessories. 

· Accepts one syringe up to 60cc. 

· Higher flow rate models available

 

 

 Ne-4000 Double Syringe Pump

 

 

 

 

NE-4000 Double Syringe Pump

 

 NE-4000-02 Double Syringe Pump, Syringe Heater Heat above 100°C Compatible

 

· Holds 2 syringes up to 60cc. 

· Has all the full-featured programmable capabilities as the NE-1000.

· Higher flow rate models available

 

 

 

NE-1600/NE-1800/NE-1200 Multi-syringe pumps

 

 

 

NE-1600/1800/1200         Multi Channel Syringe Pumps

 

  • NE-1600 holds 2 or 4 syringes up to 140cc or 6 up to 60cc each

  • · NE-1800 holds 2, 4, 6, or 8 syringes up to 10 cc

  • · NE-1200 holds 2, 4, 6, 8, 10, or 12 syringes up to 3cc each

  • · All have the same full featured capabilities as the NE-1000.

  • · Higher flow rate models available

 

 

 

  Microfluidics Syringe Pumps

 

 

 

NE-1002XMicrofluidics Single Syringe Pump

 

NE-4002X Microfluidics Double Syringe Pump

 

  • Advance Per Step: 4.252232 Nanometers, the smallest advance per step compared with the competition makes our Microfluidic pumps the Smoothest Microfluidic Pumps in the industry. 

  • · All the Features of the NE-1000 with microfluidic rates.  Infusion rates from 8 pl/hr (.5 µl cc syringe) to 2545 µl/min (140 cc syringe). 

 

 

Model : NE-300
 

NE-300 Just Infusion™ Syringe Pump
 

 

Description:

Just the features that you want, and none that you don't want to pay for.
  • Holds small or big syringes up to 60 mL
  • Pumps continuously until you stop the pump
  • Infusion rate can be changed while pumping
  • Remembers previous settings on power up
  • Power failure mode allows pump to continue pumping after a reset
  • Syringe purge mode
  • Displays total volume dispensed in mL or µL units
  • Maximum pumping rate of 1500 mL/hr with a 60 mL syringe
  • Precise reproducible flow rates
  • Selectable infusion rates units: mL/hr, µL/hr, mL/min, µL/min
  • Pictured Syringe is for Demonstration purposes only.
  • Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately.
  • Download Brochure

Infuses Only!

  • Does not withdraw, volume target, have computer interface or have programmability
  • Just the features that you want to pay for
  • NE-300 Manual
 

Specification:

Mechanical & Electrical

  • Syringe sizes: Up to 60 mL (140 mL partially filled)
  • Number of syringes: 1
  • Motor type: Step motor
  • Motor steps per revolution: 400
  • Microstepping: 1/8 to 1/2 depending on motor speed
  • Advance per step: 0.2126 uM to 0.8504 uM depending on motor speed
  • Motor to drive screw ratio: 15/28
  • Drive screw pitch: 20 revolutions/”
  • DC connector: 2.1 mm, center positive
  • Voltage at DC connector: 12V DC at full load
  • Amperage: 750 mA at full load
  • Power supply type: Unregulated linear external wall adapter, country and power source specific
  • Power supply output rating: 12V DC @ 800 mA
  • Dimensions: 8 3/4” x 5 3/4” x 4 1/2” High (22.86 cm x 14.605 cm x 11.43 cm)
  • Weight: 3.6 lbs. (1.63 kg)
  • Allen Wrench 3/32 Hex

Operational

  • Maximum speed: 3.7742 cm/min
  • Minimum speed: 0.004205 cm/hr
  • Maximum pumping rate: 1257 ml/hr with a B-D 60 cc syringe
  • Minimum pumping rate: 0.73 ml/hr with a B-D 1 cc syringe
  • Maximum force: 35 lbs. at minimum speed, 18 lbs. at maximum speed
  • Syringe inside diameter range: 0.100 to 50.00 mm

Custom Applications

For specialized and OEM applications, contact your dealer or New Era Pump Systems Inc. Custom modifications can be made to the mechanics or the firmware.

 


 Model : NE-1000
 

NE-1000 Programmable
Single Syringe Pump

Description:

  • Holds 1 Syringe up to 60 cc
    (Glass or stainless steel syringes larger than 20mL may require Anti-siphon Modification Kit. Please call 631-249-1392 or email info@syringepump.com for more information).
  • Infusion rates from 0.73 µL/hr (1 cc syringe) to 2100 ml/hr (60 cc syringe)
  • Easy-to-use keypad interface
  • Space Saving Chassis: Foot print size of only 5 3/4" x 8 3/4"
  • Won't take up unnecessary space on your laboratory or production bench
  • Includes all the advanced functions and programming features of the NE-1000 family
  • Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately.
  • Download Brochure

Special Application: Continuous Infusion (Push-Pull) and Dual Syringe Pump

Using 2 NE-1000 pumps attached with a cable, one pump will infuse while the other pump refills or have simultaneous infusion.

 

Features of the NE-1000 Family of Syringe Pumps:

  • Fully programmable; automation capable
  • Operates stand-alone or from a computer
  • Infusion and withdrawal
  • Set a single pumping rate and/or dispensing volume
  • Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
  • Network, control, and monitor up to 100 pumps with one computer
  • Worldwide power supplies available
  • Motor stall detection
  • Dispensing accuracy of +/-1%
  • Unlimited lifetime technical support
  • Two year warranty

Model & Firmware Options:

Example Flow Rates (NE-1000):

Syringe Size (cc) Maximum Rate (mL/hr) Minimum Rate (µL/hr)
0.5 µL 25.49 0.001
1 mL 53.09 0.73
3 192.5 2.646
5 406.1 5.581
10 600 8.244
20 975.8 13.41
30 1282 17.63
60 2120 29.13

 

High pressure notes:

The NE-1000 produces about 15 lbs of linear force at top speed and about 35 lbs at slow speeds. 10 ml/hr is an example of slow speed. The pressure that can be generated is relative to the syringe size. On a 60 ml syringe, this would roughly produce about 30 psi.

The high pressure version, NE-1010, will approximately double the pumping force at the same speeds.

Specification:

Mechanical & Electrical

  • Syringe sizes: Up to 60 mL (140 mL partially filled)
  • Number of syringes: 1
  • Motor type: Step motor
  • Motor steps per revolution: 400
  • Microstepping: 1/8 to 1/2 depending on motor speed
  • Advance per step: 0.2126 uM to 0.8504 uM depending on motor speed
  • Motor to drive screw ratio: 15/28
  • Drive screw pitch: 20 revolutions/”
  • DC connector: 2.1 mm, center positive
  • Voltage at DC connector: 12V DC at full load
  • Amperage: 750 mA at full load
  • Power supply type: Unregulated linear external wall adapter, country and power source specific
  • Power supply output rating: 12V DC @ 800 mA
  • Dimensions: 8 3/4” x 5 3/4” x 4 1/2” High (22.86 cm x 14.605 cm x 11.43 cm)
  • Weight: 3.6 lbs. (1.63 kg)
  • Allen Wrench 3/32 Hex

Operational

  • Maximum speed: 5.1005 cm/min
  • Minimum speed: 0.004205 cm/hr
  • Maximum pumping rate: 1699 mL/hr with a B-D 60 cc syringe
  • Minimum pumping rate: 0.73 μL/hr with a B-D 1 cc syringe
  • Maximum force: 35 lbs. at minimum speed, 18 lbs. at maximum speed
  • Number of Program Phases: 41
  • RS-232 pump network: 100 pumps maximum
  • RS-232 selectable baud rates: 300, 1200, 2400, 9600, 19200
  • Syringe inside diameter range: 0.100 to 50.00 mm

Custom Applications

For specialized and OEM applications, contact your dealer or New Era Pump Systems Inc. Custom modifications can be made to the mechanics or the firmware.

 

 

Model : NE-1010
 

NE-1010 Higher Pressure Variant (Motor Upgrade) Syringe Pump

Description:

  • All the features of the NE-1000
  • Can approximately double the pressure of the NE-1000
  • Download Brochure

Example Flow Rates (NE-1010):

Syringe
Size (cc)
Maximum Rate
(mL/hr)
Minimum Rate (µL/hr)
0.5 µL 91.83 0.001
1 mL 191.2 1.459
3 693.4 5.291
5 1462 11.17
10 2160 16.49
20 3514 26.82
30 4619 35.25
60 7635 58.26



 

Specifications

Mechanical & Electrical

  • Syringe sizes: Up to 60 cc
  • Number of syringes: 1
  • Motor type: Step motor
  • Motor steps per revolution: 200
  • Motor to drive screw ratio: 15/28
  • Drive screw pitch: 20 revolutions/”
  • DC connector: 2.5 mm, center positive
  • Voltage at DC connector: 12V DC at full load
  • Amperage: 1000 mA at full load
  • Power supply type: Unregulated linear external wall adapter, country and power source specific
  • Power supply output rating: 12V DC @ 1000 mA
  • Dimensions: 8 3/4” x 5 3/4” x 4 1/2” High (22.86 cm x 14.605 cm x 11.43 cm)
  • Weight: 3.8 lbs. (1.63 kg)
  • Allen Wrench 3/32 Hex

Operational

  • Maximum speed: 18.36964 cm/min
  • Minimum speed: 0.008409 cm/hr
  • Maximum pumping rate: 6120 mL/hr with a B-D 60 cc syringe
  • Minimum pumping rate: 1.459 μL/hr with a B-D 1 cc syringe
  • Maximum force: 100 lbs. at minimum speed, 18 lbs. at maximum speed
  • Number of Program Phases: 41
  • RS-232 pump network: 100 pumps maximum
  • RS-232 selectable baud rates: 300, 1200, 2400, 9600, 19200
  • Syringe inside diameter range: 0.100 to 50.00 mm

 

 

 


Dual-NE-1000
 

Special Application: Continuous Infusion/Dual
Syringe Pump System

The Wonder of the Dual System

The Continuous Infusion/Dual Pump System is smart, simple and saves you tons of money. With this system you have three pumps in one at a price that is less than any push/pull or emulsification syringe pump you can get from the competition. The Dual System allows two pumps to talk to one another through a cable. This allows the flexibility for the pumps to perform either continuous flow(push/pull), emulsification or independently at any time.

Description:

  • Holds 2 syringes up to 60 cc
  • Continuous infusion mode allows one pump to infuse as other withdraws
  • Dual pump mode allows for simultaneous operation with one pump mirroring the second pump
  • Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
  • Available in Higher Pressure (Dual NE-1010) and Double Syringe (Dual NE-4000) versions. (Any two of the same syringe pumps in the NE-1000 Family of Syringe Pumps can talk to each other and be a Dual System. Any system you want to create will cost the price of the two pumps individually plus $10 for the dual cable.
  • Easy-to-use keypad interface
  • Includes all the advanced functions and programming features of the NE-1000 family
  • Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately.
  • Dual Pump Plumbing Kit, the syringes and plumbing seen in the above picture, completes the continuous system. (Sold separately)
  • Download Brochure

Features Exclusive to Dual Pump System:

  • Utilizes specialized dual pump sync cable kit to synchronize both pumps, a command on one pump will update the other on the fly.
  • Includes: 2 NE-1000 programmable single syringe pumps, sync cable kit, and two power supplies
  • Disconnect the cable kit and you have two independent syringe pumps

Features of the NE-1000 Family of Syringe Pumps:

  • Built for automation
  • Operates stand-alone or from a computer
  • Infusion and withdrawal
  • Set a single pumping rate and/or dispensing volume
  • Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
  • Network, control, and monitor up to 100 pumps with one computer
  • Worldwide power supplies available
  • Motor stall detection
  • Dispensing accuracy of +/-1%
  • Unlimited lifetime technical support
  • Two year warranty

Example Flow Rates (Dual Syringe):

Syringe Size (cc)
Maximum Rate (mL/hr)
Minimum Rate (µL/hr)
0.5µL 25.49 0.001
1 53.09 0.73
3 192.5 2.646
5 406.1 5.581
10 600 8.244
20 975.8 13.41
30 1282 17.63
60 2120 29.13

 Specifications

Mechanical & Electrical

  • Syringe sizes: Up to 60 mL (140 mL partially filled)
  • Number of syringes: 1
  • Motor type: Step motor
  • Motor steps per revolution: 400
  • Microstepping: 1/8 to 1/2 depending on motor speed
  • Advance per step: 0.2126 uM to 0.8504 uM depending on motor speed
  • Motor to drive screw ratio: 15/28
  • Drive screw pitch: 20 revolutions/”
  • DC connector: 2.1 mm, center positive
  • Voltage at DC connector: 12V DC at full load
  • Amperage: 750 mA at full load
  • Power supply type: Unregulated linear external wall adapter, country and power source specific
  • Power supply output rating: 12V DC @ 800 mA
  • Dimensions: 8 3/4” x 5 3/4” x 4 1/2” High (22.86 cm x 14.605 cm x 11.43 cm)
  • Weight: 3.6 lbs. (1.63 kg)
  • Allen Wrench 3/32 Hex

Operational

  • Maximum speed: 5.1005 cm/min
  • Minimum speed: 0.004205 cm/hr
  • Maximum pumping rate: 1699 ml/hr with a B-D 60 cc syringe
  • Minimum pumping rate: 0.73 μl/hr with a B-D 1 cc syringe
  • Maximum force: 35 lbs. at minimum speed, 18 lbs. at maximum speed
  • Number of Program Phases: 41
  • RS-232 pump network: 100 pumps maximum
  • RS-232 selectable baud rates: 300, 1200, 2400, 9600, 19200
  • Syringe inside diameter range: 0.100 to 50.00 mm

Custom Applications

For specialized and OEM applications, contact your dealer or New Era Pump Systems Inc. Custom modifications can be made to the mechanics or the firmware.

 

 

 


NE-1002X

 

NE-1002X Programmable Microfluidics Syringe Pump
 

Description:

  • The smoothest microfluidic syringe pump on the market. (Compare our advance per step with the competition and discover for yourself.)
  • Holds 1 syringe up to 60 cc*
  • Advance Per Step: 4.252232 Nanometers
  • Infusion rates from 8 pl/hr (.5 µL cc syringe) to 2545 µL/min (140 cc syringe)
  • Available in Double Syringe (NE-4002X) version
  • Easy-to-use keypad interface
  • Space Saving Chassis: Foot print size of only 5 3/4" x 8 3/4"
    Won't take up unnecessary space on your laboratory or production bench
  • Includes all the advanced functions and programming features of the NE-1000 family
  • Includes the X Upgrade Smooth Linear/Gradient increasing and decreasing pumping feature
  • Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately.
  • Download Brochure

 

Special Application: Continuous Infusion (Push-Pull) and Dual Syringe Pump

Using 2 NE-1000 pumps attached with a cable, one pump will infuse while the other pump refills or have simultaneous infusion.

 

Features of the NE-1000 Family of Syringe Pumps:

  • Fully programmable; automation capable
  • Operates stand-alone or from a computer
  • Infusion and withdrawal
  • Set a single pumping rate and/or dispensing volume
  • Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
  • Network, control, and monitor up to 100 pumps with one computer
  • Worldwide power supplies available
  • Motor stall detection
  • Dispensing accuracy of +/-1%
  • Unlimited lifetime technical support
  • Two year warranty

Example Flow Rates (NE-1002X & NE-4002X):

Syringe Size (µl & cc) Maximum Rate (µl/mn) Minimum Rate (nl/hr)
0.5 µl 18.7 nl/min 0.008
1 µl 37.57 nl/min 0.015
2 µl 74.81 nl/min 0.029
5 µl 2979 nl/min 1.117
10 cc 445.6 167
20 cc 722.9 270.9
30 cc 940.7 352.5
60 cc 1555 582.6
Sample syringe configurations, can hold any size syringes below 60 cc.

 

Maximum syringe size:

Although a maximum of a 60 cc syringe is specified, the pump can hold up to a 140 cc syringe but can only open up to about 120 cc lengthwise.
 

Specifications

Mechanical & Electrical

  • Advance per micro-step 4.252232 Nanometers
  • Syringe sizes: Smallest micro-liter, up to 60 cc
  • Number of syringes:
  • NE-1002X: 1
  • NE-4002X: 2
  • Motor type: Step motor
  • Motor steps per revolution: 400
  • Motor gearbox 25:1 reduction
  • Motor to drive screw ratio: 15/28
  • Drive screw pitch: 20 revolutions/”
  • Power supply: Switching Regulated 12V 1A,
  • Standard 2.1 mm female center positive
  • Country prong style specific
  • Amperage: 500 mA at full load
  • Dimensions: 8 3/4” x 5 3/4” x 4 1/2” High (22.86 cm x 14.605 cm x 11.43 cm)
  • Weight: 3.8 lbs. (1.63 kg)

Operational

  • Maximum speed: 0.2245 cm/min
  • Minimum speed: 0.8409μm/hr
  • Maximum pumping rate: 1246 μL/mn with a B-D 60 cc syringe
  • Minimum pumping rate: 14.59 nL/hr with a B-D 1 cc syringe
  • Maximum force: 100 lbs. at minimum speed, 18 lbs. at maximum speed
  • Number of Program Phases: 41
  • RS-232 pump network: 100 pumps maximum
  • RS-232 selectable baud rates: 300, 1200, 2400, 9600, 19200
  • Syringe inside diameter range: 0.100 to 50.00 mm

 

 


NE-4000
 

NE-4000 Programmable Double Syringe Pump

Description:

  • Holds 2 Syringes up to 60 cc each, can be different sizes
    (Glass or stainless steel syringes larger than 20mL may require Anti-siphon Modification Kit. Please call 631-249-1392 or email info@syringepump.com for more information).
  • Infusion rates from 1.459 µL/hr (1 cc syringe) to 7635 ml/hr (60 cc syringe)
  • Easy-to-use keypad interface
  • Space Saving Chassis: Foot print size of only 5 3/4" x 8 3/4"
    Won't take up unnecessary space on your laboratory or production bench
  • Includes all the advanced functions and programming features of the NE-1000 family
  • Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately.
  • Download Brochure

 

Special Application: Continuous Infusion (Push-Pull) and Dual Syringe Pump

Using 2 NE-4000 pumps attached with a cable, one pump will infuse while the other pump refills or have simultaneous infusion.

 

Features of the NE-1000 Family of Syringe Pumps:

  • Fully programmable; automation capable
  • Operates stand-alone or from a computer
  • Infusion and withdrawal
  • Available in Microfluidics (NE-4002X) and OEM (NE-4500) versions
  • Set a single pumping rate and/or dispensing volume
  • Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
  • Network, control, and monitor up to 100 pumps with one computer
  • Worldwide power supplies available
  • Motor stall detection
  • Dispensing accuracy of +/-1%
  • Unlimited lifetime technical support
  • Two year warranty

 

High pressure notes:

The NE-4000 produces about 15 lbs(7.5 lbs/syringe) of linear force at top speed and about 100 lbs(50 lbs/syringe) at slow speeds. 10 ml/hr is an example of slow speed. The pressure that can be generated is relative to the syringe size. On a 60 ml syringe, this would roughly produce about 30 psi.
 


NE-4000 Double Syringe Pump
 
 
Syringe Size (cc) Maximum Rate (mL/hr) Minimum Rate (µL/hr)
0.5 µL 91.83 0.001
1 mL 191.2 1.459
3 693.4 5.291
5 1462 11.17
10 2160 16.49
20 3514 26.82
30 4619 35.25
60 7635 58.26
Specifications

Mechanical & Electrical

  • Syringe sizes: Up to 60 mL. 140 mL partially filled
  • Number of syringes: 2
  • Motor type: Step motor
  • Motor steps per revolution: 200
  • Microstepping: 1/8 to 1/2 depending on motor speed
  • Advance per step: 0.42522321 uM to 1.7009 uM depending on motor speed
  • Motor to drive screw ratio: 15/28
  • Drive screw pitch: 20 revolutions/”
  • DC connector: 2.5 mm, center positive
  • Voltage at DC connector: 12V DC at full load
  • Amperage: 1000 mA at full load
  • Power supply type: Unregulated linear external wall adapter, country and power
  • source specific
  • Power supply output rating: 12V DC @ 1000 mA
  • Dimensions: 8 3/4” x 5 3/4” x 4 1/2” High
  • (22.86 cm x 14.605 cm x 11.43 cm)
  • Weight: 3.6 lbs. (1.63 kg)

Operational

  • Maximum speed: 18.36964 cm/min
  • Minimum speed: 0.008409 cm/hr
  • Maximum pumping rate: 6120 mL/hr with a B-D 60 cc syringe
  • Minimum pumping rate: 1.459 μL/hr with a B-D 1 cc syringe
  • Maximum force: 100 lbs. at minimum speed, 18 lbs. at maximum speed
  • Number of Program Phases: 41
  • RS-232 pump network: 100 pumps maximum
  • RS-232 selectable baud rates: 300, 1200, 2400, 9600, 19200
  • Syringe inside diameter range: 0.100 to 50.00 mm

Custom Applications

For specialized and OEM applications, contact your dealer or New Era Pump Systems Inc. Custom modifications can be made to the mechanics or the firmware.

 

 

 

 


NE-4002X
 

NE-4002X Programmable Double
Microfluidics Syringe Pump

Description:

  • Same description and all the features of the NE-1002X plus...
  • Holds 2 syringes up to 60 cc*
  • Flow rates are the same as the NE-1002X
  • Download Brochure

Specifications

Mechanical & Electrical

  • Syringe sizes: Up to 60 mL. 140 mL partially filled
  • Number of syringes: 2
  • Motor type: Step motor
  • Motor steps per revolution: 200
  • Microstepping: 1/8 to 1/2 depending on motor speed
  • Advance per step: 0.42522321 uM to 1.7009 uM depending on motor speed
  • Motor to drive screw ratio: 15/28
  • Drive screw pitch: 20 revolutions/”
  • DC connector: 2.5 mm, center positive
  • Voltage at DC connector: 12V DC at full load
  • Amperage: 1000 mA at full load
  • Power supply type: Unregulated linear external wall adapter, country and power
  • source specific
  • Power supply output rating: 12V DC @ 1000 mA
  • Dimensions: 8 3/4” x 5 3/4” x 4 1/2” High
  • (22.86 cm x 14.605 cm x 11.43 cm)
  • Weight: 3.6 lbs. (1.63 kg)

Operational

  • Maximum speed: 18.36964 cm/min
  • Minimum speed: 0.008409 cm/hr
  • Maximum pumping rate: 6120 mL/hr with a B-D 60 cc syringe
  • Minimum pumping rate: 1.459 μL/hr with a B-D 1 cc syringe
  • Maximum force: 100 lbs. at minimum speed, 18 lbs. at maximum speed
  • Number of Program Phases: 41
  • RS-232 pump network: 100 pumps maximum
  • RS-232 selectable baud rates: 300, 1200, 2400, 9600, 19200
  • Syringe inside diameter range: 0.100 to 50.00 mm

Custom Applications

For specialized and OEM applications, contact your dealer or New Era Pump Systems Inc. Custom modifications can be made to the mechanics or the firmware.

 

 

 


NE-1200,NE-1600,NE-1800
 
NE-1200

 

Description:

  • Holds 2, 4, 6, 8, 10 or 12 syringes of up to 3 cc each
    (Glass or stainless steel syringes larger than 20mL may require Anti-siphon Modification Kit. Please call 631-249-1392 or email info@syringepump.com for more information).
  • Infusion rates from 0.45µL/hr ( 1 cc syringe) to 153.2 ml/hr (3 cc syringe)
  • Easy-to-use keypad interface
  • Higher flow rate models available
  • Includes all the Features of the NE-1000 Family of Syringe Pumps
  • Includes all the advanced functions and programming features of the NE-1000 family
  • Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately.
  • Download Brochure

Example Flow Rates
(NE-1200):

 
Syringe Size (cc) Maximum Rate (mL/hr) Minimum Rate (µL/hr)
0.5 (µL) 16.66(µL/hr) 0.001
2 (µL) 69.82(µL/hr) 0.001
5(µL) 174.8(µL/hr) 0.003
1 54.21 0.452
3 153.2 1.515
NE-1600

 

Description:

  • Holds 2, 4, or 6 syringes of up to 140 cc each
    (Glass or stainless steel syringes larger than 20mL may require Anti-siphon Modification Kit. Please call 631-249-1392 or email info@syringepump.com for more information).
  • Infusion rates from 0.452µL/hr (1 cc syringe) to 1451 ml/hr (60 cc syringe)
  • Easy-to-use keypad interface
  • Higher flow rate models available
  • Includes all the advanced functions and programming features of the NE-1000 family
  • Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately.
  • Download Brochure

Features of the NE-1000 Family of Syringe Pumps:

  • Fully programmable; automation capable
  • Operates stand-alone or from a computer
  • Infusion and withdrawal
  • Set a single pumping rate and/or dispensing volume
  • Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
  • Network, control, and monitor up to 100 pumps with one computer
  • Worldwide power supplies available
  • Motor stall detection
  • Dispensing accuracy of +/-1%
  • Unlimited lifetime technical support
  • Two year warranty
 
 

 

 
NE-1800

 

Description:

  • Holds 2, 4, 6, or 8 syringes of up to 10 cc each
    (Glass or stainless steel syringes larger than 20mL may require Anti-siphon Modification Kit.
  • Infusion rates from 0.568µL/hr (1 cc syringe) to 380 ml/hr (10 cc syringe)
  • Easy-to-use keypad interface
  • Higher flow rate models available
  • Includes all the advanced functions and programming features of the NE-1000 family
  • Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately.
  • Download Brochure

Example Flow Rates
(NE-1800):

 
Syringe Size (cc) Maximum Rate (mL/hr) Minimum Rate (µL/hr)
0.5 µL 16.66 0.001
1 34.69 0.73
3 125.7 2.646
5 265.4 5.581
10 392 8.244
 

 

 

 


Specification of NE-1200,NE-1600,NE-1800
NE-1200

NE-1600

NE-1800

 
 
Specifications

Mechanical & Electrical

  • Syringe sizes:
  • NE-1600 Up to 140 cc in 4 channels 60mL in 6 channels
  • NE-1800 Up to 10 cc
  • NE-1200 Up to 3 cc
  • Number of syringes:
  • NE-1600 6
  • NE-1800 8
  • NE-1200 12
  • Motor type: Step motor
  • Motor steps per revolution: 200
  • Microstepping: 1/8 to 1/4 depending on motor speed
  • Advance per microstep: 0.132291667 to 0.264583333 μM depending on motor speed
  • Motor to drive screw ratio: 5/1
  • Drive screw pitch: 24 revolutions/”
  • DC connector: 2.5 mm, center positive
  • Voltage at DC connector: 12V DC at full load
  • Amperage: 1000 mA at full load
  • Power supply type: Unregulated linear external wall adapter, country and power
  • source specific
  • Power supply output rating: 12V DC @ 1000 mA
  • Dimensions: 10 1/4” x 15” x 5” High
  • (26.035 cm x 38.1 cm x 12.7 cm)
  • Weight: 10.125 lbs. (4.595 kg)

Operational

  • Maximum speed: 3.4917 cm/min
  • Minimum speed: 0.0026 cm/hr
  • Maximum pumping rate: 1163 mL/hr with a B-D 60 cc syringe
  • Minimum pumping rate: 0.454 μL/hr with a B-D 1 cc syringe
  • Force applied to all syringes: 160 lbs. at minimum speed, 30 lbs. at maximum speed
  • Number of Program Phases: 41
  • RS-232 pump network: 100 pumps maximum
  • RS-232 selectable baud rates: 300, 1200, 2400, 9600,
  • Syringe inside diameter range: 0.100 to 50.00 mm

    Custom Applications

    For specialized and OEM applications, contact your dealer or New Era Pump Systems Inc. Custom modifications can be made to the mechanics or the firmware.


 

 

 


NE-9000
 

NE-9000 Programmable Peristaltic Pump
 

 

Description:

√  Pump from a reservoir through replaceable continuous tubing.
√  Pump never comes into contact with fluid.
√  Continuous Pumping. Up to 900 ml/min.
√  Measured dispenses for production filling of bottles.
√  Learn and Repeat™ for quick setup of production dispenses.
√  Computer and foot switch interface.

 

Description:

  • Have a need to accurately fill multiple bottles, vials, or other containers with a liquid? The Learn and Repeat™ mode of the NE-9000 Peristaltic Pump from New Era Pump Systems Inc. makes even the smallest of businesses highly productive right from day one.
  • The NE-9000 is equipped to be used in many settings from the small home based businesses to the large factory floor. The pump can be integrated into existing production lines or simply used stand alone.
  • The NE-9000 comes fully programmable and can be operated manually or with a PC through a RS-232 communication port. Even the most novice of technology users can easily operate the pump stand alone or through the PC
  • The pump's specialty is in small scale production dispensing. It will fill numerous bottles, vials, etc. with fluids of all types.
  • Equipped for mass production dispensing at a price affordable for the home based business, this pump is a great deal no matter what your purchasing power is.
  • The flow rates vary from a minimum of 0.041 ml/min (0.001386oz*/min) to a maximum of 904.4 ml/min (30.6oz*/min) with 3/16 id tubing.
  • Easy-to-use keypad interface
  • Space Saving Chassis: Foot print size of only 7 3/4” x 5 1/4”
  • Download Brochure
* Ounces are in the US system's of measurement

Features:

  • Dispense and withdrawal pumping
  • Learn and Repeat™
  • Foot Switch control available.
  • Slow down mode to improve accuracy of dispenses
  • Anti-Drip mode to stop oozing after dispenses
  • Calibration mode to improve accuracy
  • Programmable dispense volumes. Store and select from up to 40 Dispenses.
  • Non-volatile memory of all operating parameters and pumping program
  • Programmable Phases allowing complex pumping applications and interaction with external devices.
  • RS-232 bi-directional control for complete control from a PC. Network up to 100 pumps and other devices.
  • Digital logic input: TTL I/O with software filtered control inputs to eliminate glitches and ringing on the control inputs. Configurable TTL operational trigger for foot switches and other devices.
  • Power Failure Mode: Restarts the Pumping Program after a power interruption
  • Audible Alarm
  • Two year warranty
  • Includes all the advanced functions and programming features of the NE-1000 family
  • Worldwide power supplies available
  • Model Q-TUBE-NORPRENE-A60G Norprene Industrial Grade Tubing 3/16"ID x 5/16"OD x 1/16" Wall - comes with the peristaltic pump (4 ft.)
  • Other tubing and accessories are sold separately. Click here to view our selection of supplies and accessories.
 

.

 


Accessories

Syringes and Accessories
Disposable Plastic Syringes Glass
Syringes
Stainless Steel Syringes Plumbing Accessories Analog Pump Interface Syringe Heater Kit
 


 


Catalog original


Manage


Quotation template


Suppliers


 
 
short noteote

 

 

  Be a fan on facebookk

 

National Direct Network Co., Ltd.
240 Soi Petchkasem 63/4 Petchkasem Road, Bangkae, Bangkae, Bangkok, Thailand 10160
Tel : 02 4444-655 Fax: 02 4444-650 email : sales@ndn.co.th